- Vacuum controller for up to (4) Televac® MX active vacuum gauges and (1) CDG
- EthernetIP connections to the Televac® MX2A, MX4A, MX7B, and MX7M Active Vacuum Gauges
- 진공 게이지 연결을 위한 저렴한 비용, 표준 Cat5e 케이블
- 아날로그 신호에서 대기 시간을 크게 줄입니다(HMI/진공 게이지 디스플레이 불일치)
- HMI에서 진공 게이지를 디지털 보정
- Configure all settings for Televac® MX series active vacuum gauges
- 게이트웨이 및 연결된 진공 게이지 전원을 공급하는 24 V DC 전원 공급 장치
- CDG용 옵션 ±15 V DC 전원 공급 장치 연결
- 랙 및 패널 장착 가능
- PC, PLC 및 기타 장비에 진공 압력 컨트롤러를 간단하게 연결하기 위한 이더넷IP
- 클래스 1(순환) 및 클래스 3(비순환) 연결 지원
- 프로그래밍 가능한 IP 주소 및 DHCP 사용/비활성화
- 10/100 Mbit, 절반 또는 전체 이중 포트 작업
- USB를 통한 현장 업그레이드 가능한 펌웨어
- 네트워크/모듈 상태/포트 데이터 활동을 위한 상태 LED
- 웹 브라우저를 통해 네트워크 및 게이트웨이 데이터 및 설정에 대한 웹 액세스 보안
- 우수한 고객 지원
The MX Active Gauge EthernetIP Gateway (sometimes also called an EthernetIP vacuum controller, EthernetIP vacuum control unit, or EthernetIP vacuum pressure controller) is the first and only solution designed to provide an EthernetIP connection between Televac® active vacuum gauges and Rockwell Automation® Allen-Bradley® PLCs. An increasingly popular industrial network communication standard, EthernetIP communication offers users faster and more reliable vacuum measurements and eliminates the need for additional analog-to-digital converters or other vacuum controllers and vacuum pressure controllers.
이더넷IP 진공 컨트롤러 게이트웨이 호환 액티브 진공 게이지
This EthernetIP vacuum control unit supports an easily configurable network of up to (4) Televac® active vacuum gauges and (1) capacitance diaphragm vacuum gauge (CDG) through EthernetIP communications. Multiple gateways can also be daisy-chained together for additional vacuum gauge connections (made possible by dual EthernetIP ports on the back of the unit). The gateway allows users to interface directly with supported PLCs and PCs, including the ability to read vacuum measurements and change vacuum gauge settings from a convenient, remote location without complicated conversion tools. In addition to Televac vacuum gauges, the gateway supports CDGs from MKS, Inficon, Leybold, Brooks, and Setra. 24 V DC and ±15 V DC with D-sub 15 (DB15) and D-sub 9 (DB9) connectors are supported.
MX 액티브 게이지 이더넷IP 게이트웨이
RJ45 어댑터
Cat5e Ethernet Cables
| 운영 범위 | 5*10-11 Torr to 1*104 Torr |
| Communications (External) | 이더넷IP |
| Communications (Active Gauges) | RS-485 |
| 액티브 게이지 RS-485 주소 | 1 to 4 |
| 액티브 게이지 RS-485 보 | 38400 |
| 공급 전압 | 22 V DC to 26 V DC |
| 최대 전력 | 최대 30W |
| 작동 온도 | 0°C ~ 50°C |
| 보관 온도 | -20°C ~ 70°C |
| Maximum Active Gauges Controlled | 4 |
| 최대 CDG 제어 | 1 |
| 응답 시간 | ≤100 ms |
| P1 | EthernetIP RJ45 port 1 to PLC/PC |
| P2 | EthernetIP RJ45 port 2 to PLC/PC |
| NS | Network status LED |
| MS | Module status LED |
| 1 | Active gauge 1 connection |
| 2 | Active gauge 2 connection |
| 3 | Active gauge 3 connection |
| 4 | Active gauge 4 connection |
| CDG | CDG connection |
| 24 | +24 V DC supply |
| GND | Ground Supply |
| +15 | +15 V DC supply for CDG (optional) |
| -15 | -15 V DC supply for CDG (optional) |
| BTLD | Bookload button |
| 증권 시세 표시기 | USB communication for bootloading |
| Connectors | (2) RJ45 |
| Ports | 10/100 Mbit, half or full duplex |
| DHCP | Enable or disable |
| Class 1 Connections | |
| Connection Type | Point-to-point, multicast |
| Target to Originator Instance ID | 100 |
| Data Size | 20 |
| Originator to Target Instance ID | 150 |
| Data Size | 4 |
| Configuration Instance | 3 |
| Supported Connections | 4 |
| Requested Packet Interval | 1 ms to 3200 ms |
| Trigger Types | Cyclic, change of state |
| Priorities | Low, high, schedule, urgent |
| Class 3 Connections | |
| Service | 0xE (get), 0X10 (set) |
| Class | 0xA2 |
| Instance | See ADI table |
| Data Value Attribute | 5 |
| Supported Connections | 6 |
| Requested Packet Interval | 100 ms to 10000 ms |
| Connection Type | Point-to-point |
| Trigger Type | 응용 프로그램 |
| Priority | 낮은 |
Please refer to the instruction manual for a complete list of Class 1 and Class 3 connection details, a complete list of ADIs, and information about the Electronic Data Sheet (EDS) file.
The RJ45 connectors labeled P1 and P2 are the EthernetIP connections that will run to the PLC or PC. The RJ45 connectors labeled 1 through 4 are the active gauge inputs. These will run through Cat5e Ethernet cables and through an adapter to attach to the active gauges in the network. All active gauges must be set to separate RS-485 addresses 1 through 4 and baud rate 38400 to communicate with the gateway. The RJ45 connector labeled CDG will connect to the CDG in the network if one is available. The CDG must be turned on through the appropriate parameter in the ADI table.
The power input connector accepts a +24 V DC and GND connection, as well as an optional ±15 V DC input to run to the attached CDG if required. Regardless of the alternate supply, the gateway and attached active gauges require the +24 V DC input to be connected in order to operate. The pushbutton labeled BTLD is to be pressed while powering the gateway to send the unit into bootload mode for the ability to easily update the firmware, and the update occurs over the USB connection.
| 인클로저 | 알루미늄 |
| 전기 연결 | 4핀 커넥터 |
| 무게 | 0.65 kg (1.4 파운드) |
| Certified to UL 61010-1 |
| Certified to CAN/CSA C22.2 No. 61010-1-12 |
| CE certified to EN 61010-1, EN 61236-1, EN 55011 |
| RoHS compliant |
| IP40 |
| EAC certified |
| NIST 추적 가능한 교정 옵션 |
제품 설명서
| MX 액티브 게이지 이더넷IP 게이트웨이 데이터시트 |
| MX 액티브 게이지 이더넷IP 게이트웨이 사용 설명서 |
| MX 액티브 게이지 이더넷IP 게이트웨이 EDS 파일 |
| Televac®️ Vacuum Calibration Tolerances |
응용 프로그램 노트
도구
| 원격® 진공 측정 컨버터 |
기사
| Vacuum Measurement Using Modern Cold Cathode Technology |
Brochures
| Televac®️ Vacuum Measurement Product Catalog |
MX Active Gauge EthernetIP
Gateway Quantity Discounts
| 수량 | Discount |
| 1 | List |
| 5 | 2% |
| 10 | 5% |
| 15 | 7% |
| 20 | 10% |
| 25 | 13% |
| 30+ | 15% |
Cat5e Ethernet Cable Quantity
Discounts
| 수량 | Discount |
| 1 | List |
| 50 | 5% |
| 75 | 10% |
| 100+ | 15% |
Using the Gateway for Heat Treat and Vacuum Furnace Applications
This vacuum controller gateway is particularly useful for heat treat and vacuum furnace applications where a single gateway can eliminate the need for up to (5) analog-to-digital converter (ADC) input channels while simultaneously reducing any latency from analog-to-digital conversions (causing a mismatch between the vacuum gauge display and the furnace human-machine-interface or HMI). The EthernetIP vacuum controller gateway also gives the end user the ability to calibrate their vacuum gauges from their HMI by interfacing digitally with the vacuum controller gateway. This means no more climbing on top of your furnace to do vacuum measurement comparisons! The ability to change settings and calibrate digitally is due to the unique design of the vacuum controller gateway, where all communication with Televac® vacuum gauges is done digitally (via RS-485).
더 많은 정보 및 유사 제품
본질적으로 이더넷IP 진공 압력 컨트롤러 게이트웨이를 이더넷IP 컨버터에 대한 멋진 RS-485로 생각할 수 있습니다. 이에 대한 예외는 CDG의 0~10V DC 아날로그 출력을 가져와 디지털 값(아날로그-디지털 컨버터 사용)으로 변환한 CDG 입력으로, 이더넷IP를 통해 읽을 수 있습니다. 이더넷IP 진공 컨트롤러/진공 제어 장치 솔루션(액티브 진공 게이지 및 게이트웨이 대신)을 찾고 있다면 MX200 이더넷IP를확인하십시오!