F203-00A-212-00 Analog/RS-232 Inclinometer (New!)

Part Number: F203-00A-212-00

Mögliche Alternative für die folgenden Neigungssensoren der AAL-Serie von TE Connectivity/Measurement Specialties/HL Planar: NS-2/AAL2-UDD, NS-5/AAL2-UDD, NS-10/AAL2-UFG, NS-10/AAL2-UDG, NS-15/AAL2-UDG, NS-30/AAL2-UDN.

Merkmale und Vorteile:

  • ±3° operating range, ±1° linear range inclinometer
  • ±0.001° repeatability angle measurements
  • Neigungsmesser mit zwei/zwei Achsenmessung
  • Simple to use analog 0 to 5 V DC output and RS-232 digital communications
  • 7 bis 16 V DC Versorgungsspannung
  • PCB-Board-Level-Design für einfache Integration
  • Ausgezeichnete Kundenbetreuung

The F203-00A-212-00 dual-axis high-precision analog and digital inclinometer sensor with analog 0 to 5 V DC outputs for each axis. It also has RS-232 digital communications with a 16-bit unsigned angular position measurement output. It is designed and manufactured by Fredericks for use in structural monitoring applications, construction tools, and other applications where a very high precision, industrial-grade solution is required. This high-precision digital inclinometer sensor utilizes two Fredericks 0703-0712-99 narrow-range single-axis electrolytic tilt sensors and is mounted on our 1-6200-012 16-bit analog and RS-232 signal conditioner to provide the most accurate angle measurements.

The use of our high-accuracy single-axis sensors and the 16-bit ADCs and DACs on the 1-6200-012 signal conditioner make this inclinometer are what make this one of our highest precision products. Our specialized manufacturing techniques give this unit superior tolerances and unit-to-unit performance. It is an excellent solution for a versatile range of applications in many sectors.

The Fredericks Company’s inclinometers take our proven electrolytic tilt sensors and combine them with electrolytic tilt sensor circuits to make inclinometer solutions for use in various markets and applications. Electrolytic tilt sensing technology makes these inclinometers extremely stable with minimal long-term drift compared to MEMS devices. It is an easy-to-use inclinometer package that’s simple to integrate.

Beschreibung des Produkts
±3° Dual-Axis Analog/RS-232 Inclinometer
±3° Dual-Axis Analog/RS-232 Inclinometer
PN: F203-00A-212-00
Digitale Schnittstelle RS-232
Analoger Ausgang 0 bis 5 V DC
Versorgungsspannung 7 V DC bis 16 V DC
Versorgungsstrom <10 mA
Betriebsbereich ±3º
Linearer Bereich ±1º
Reproduzierbarkeit ±0.001°
Auflösung ≤0.001°
Null-Offset ±2°
Long Term Stability/Drift ≤0.005°
Null-Temperatur-Koeffizient ≤0.0005° per °C
Scale Temperature Coefficient (±1°) 0.375%
Materialien Contains magnetic metals
Betriebstemperatur -20 °C bis 50 °C
Lagertemperatur -40 °C to 100 °C
Time Constant (63.2% of output) ≤1 Sekunde

Linearer Bereich



Gehäuse Keine
Elektrische Anschlüsse 8-pin Molex 0015910080
Mating Connector 8-Pin Molex 0022552081
Gewicht 20 g
Länge 45 mm (1.78”)
Breite 45 mm (1.78”)
Höhe 11 mm (0.43”)
Pin 1 Gnd Ground
Pin 2 Gnd Ground
Pin 3 VCC Supply Voltage (+)
Pin 4 Gnd Ground
Pin 5 RX RS-232 Receieve
Pin 6 Xa X Analog Output (0 to 5 V DC)
Pin 7 Ya Y Analog Output (0 to 5 V DC)
Pin 8 TX RS-232 Transmit

RS-232 Information

Baud Rate 9600 (default, selectable up to 115200)
Data Bits 8
Parity Keine
Stop Bits 1

RS-232 Commands

‘x’ or ‘X’ X axis output (0 to 65535)
‘y’ or ‘Y’ Y axis output (0 to 65535)
‘t’ or ‘T’ Temperature output (0 to 1023)
‘s’ or ‘S’ Output X, Y, temperature at set intervals
‘r’ or ‘R’ Stop timed interval output
‘1’ to ‘5’ Set delay (in seconds) for set intervals
‘v’ or ‘V’ Product information and version
‘B1’ Set baud rate to 9600
‘B2’ Set baud rate to 19200
‘B3’ Set baud rate to 38400
‘B4’ Set baud rate to 57600
‘B5’ Set baud rate to 115200
‘?’ List all commands

Download STEP File

Teilenummer Beschreibung STEP File
F203-00A-212-00 ±3° Analog/RS-232 Inclinometer Download
Menge Preis
1 $335.97
10 $319.36
100 $289.34
500 $271.69
1000+ $261.17