0729-1760-99 Dual-Axis RS-485 Digital Inclinometer

Part Number: 0729-1760-99

Merkmale und Vorteile:

  • ±60° operating range, ±25° linear range digital inclinometer
  • Neigungsmesser mit zwei/zwei Achsenmessung
  • Einfach zu bedienender digitaler Neigungsmesser mit RS-485-Kommunikation
  • Ansprechzeit von ≤100 ms hochpräziser digitaler Neigungssensor
  • Großer Spannungsversorgungsbereich von 7 V DC bis 16 V DC
  • Funktioniert mit branchenüblichen 12-V-Gleichstrom-Fahrzeugbatterien
  • Niederstromgerät, das 20 mA bei 12 V DC zieht; geringe Leistungsaufnahme
  • Mehrere elektrische Anschlussoptionen (Deutsch, fliegende Leitungen, AMP VAL-U-LOK) für einfache Integration
  • ABS housing with potting to provide IP66 environmental protection
  • Überlegene Leistung bei extremen Temperaturen und Umgebungen
  • Ausgezeichnete Kundenbetreuung

The 0729-1760-99 dual-axis high precision digital inclinometer sensor with RS-485 communications and an IP66 environmental rating is designed and manufactured in the USA by Fredericks for use on heavy industrial machinery and other applications where an industrial, robust, cost-efficient digital inclinometer is needed. This high-precision digital inclinometer sensor has a wide linear angle range and RS-485 communications combined with a small footprint make it simple to integrate into new or existing equipment and designs. The standard version of this digital inclinometer sensor has a cable with flying leads, but Deutsch and Amphenol connectors are also available.

The Fredericks Company’s digital inclinometers take our proven electrolytic tilt sensors and combine them with electrolytic tilt sensor circuits in robust housings with potting to make them environmentally sealed (waterproof and dustproof) digital inclinometer solutions for use in various markets and applications. Electrolytic tilt sensing technology makes these inclinometers extremely stable with no long-term drift compared to MEMS devices, all in a low-cost inclinometer package.

Beschreibung des Produkts
±60° Dual-Axis RS-485 Inclinometer
±60° Dual-Axis RS-485 Inclinometer
PN: 0729-1760-99
Ausgang RS-485
Versorgungsspannung 7 V DC bis 16 V DC
Versorgungsstrom 20 mA @ 7 V DC
Betriebsbereich ±60º
Linearer Bereich ±25º
Typical Output Behavior View on office.com | Download (.xlsx)
Achsen der Messung 2
Linearity (% of ±60°) ≤7.0%
Linearity (% of ±25°) ≤2.0%
Symmetry (±60°) ≤3°
Symmetry (±25°) ≤1°
Reproduzierbarkeit ≤0.1°
Auflösung ≤0.003°
Null-Offset ≤5°
Empfindlichkeit der Querachse (Rollen) ≤0,025° pro Grad
Long Term Stability/Drift ≤0.1°
Null-Temperatur-Koeffizient ≤0,006° pro °C
Skala Temperaturkoeffizient 0,1 % pro °C
Materialien Contains magnetic metals
Betriebstemperatur -40 °C bis 70 °C
Lagertemperatur -40 °C bis 70 °C
Bereich des Temperatursensors -40 °C bis 125 °C
Time Constant (63.2% of output) ≤100 ms
Settling Time ≤500 ms

Linearer Bereich



Gehäuse ABS-Kunststoff
Elektrische Anschlüsse 12" cable with 24-gauge wire
Gewicht 47 g
Länge 56.3 mm (2.217”)
Breite 40.0 mm (1.575”)
Höhe 20.0 mm (0.787”)
Bohrung Mitte 47.8 mm (1.882”)
0729-1760-99 Dimensional Drawing
Red Supply (7 V DC to 16 V DC)
Black Supply (Ground)
Yellow Ground
Green RS-485 B (+)
Blue RS-485 A (-)

RS-485 Information

Baud Rate (default 9600) 1200 to 38400
Data Bits 8
Parity Keine
Stop Bits 1
Address (default 99) 01 to 99
Maximum Signal Conditioners on Bus 32

RS-485 Commands

*9911# X axis output (0 to 65535)
*9921# Y axis output (0 to 65535)
*9941# Temperature output (0 to 1023)
*9980# Read product information
*9981Axx# Change address to xx (01 to 99)
*9982D# Read user information
*9984Z# Set current position as zero
*9984R# Clear saved zero position
*9988Rx# Change baud rate to x (1 to 6)
*9989B# Reset to factory default settings

Download STEP File

Teilenummer Beschreibung STEP File
0729-1760-99 ±60° RS-485 Inclinometer Download
Menge Preis
1 $162.64
500 $127.34
1000+ $121.40