Teilenummern: 2-8950-KF16, 2-8950-KF25, 2-8950-KF40, 2-8950-CF40
Kompatibel mit: MX Active Gauge EthernetIP Gateway
Merkmale und Vorteile:
- Hochgradig kontaminationsresistente Kaltkathoden-Ionisationsmessgerätekonstruktion
- Alle Metalldichtungen führen zu geringer Ausgasung
- Kompakte Bauweise
- Farb-OLED-Display
- Konfigurierbarer 0 bis 10 V Analogausgang
- Sollwertrelais und offener Anschluss für Prozesssteuerung
- RS-485- und USB-Kommunikationsstandard
- EthernetIP-Kommunikation verfügbar über das MX Active Gauge EIP-Gateway
- Leicht zu reinigendes Ionisationsmessgerät für eine längere Lebensdauer des Sensors
- ISO 17025 accredited and NIST-traceable calibrations optional
- Schnelle Reaktionszeit für Kalibrierung und Service
Das neue Televac® MX7M ist ein aktives Vakuummeter (auch als analoges Vakuummeter oder ein digitales Vakuummessgerät) mit dem neuen Televac® 7M Kaltkathoden-Ionisationsmessgerät, das über einen weiten Messbereich von 5*10-11 bis 1*10-2 Torr verfügt (wenn Sie diesen Wert in eine andere Maßeinheit umrechnen möchten, schauen Sie sich unseren praktischen Einheitenumrechner an). Dies ist die einzige reinigbare Kaltkathode auf dem Markt, die im Bereich von 10-11 Torr misst. Das neue dreifach invertierte Magnetron-Design verbessert die Gesamtgenauigkeit des Vakuummessgeräts, indem es die Linearität verbessert und gleichzeitig das magnetische Streufeld deutlich verringert.
This vacuum gauge has all-metal seals, minimizing outgassing while maintaining a compact overall design. The MX7M cold cathode gauge also has a variety of features including a configurable 0 to 10 V DC analog output, RS-485 communications (EthernetIP optional), two programmable set points (relays and open collectors), and a bright OLED display with a 180° viewing angle.
All features of this cold cathode gauge are accessible through the display and touch controls or through the digital communications. Note that we also have an EthernetIP gateway for this active gauge which enables EthernetIP communication with a Rockwell Automation® Allen-Bradley® PLC. Combining this cold cathode gauge with a rough vacuum gauge such as the MX2A thermocouple active vacuum gauge or MX4A convection active vacuum gauge will provide full range measurement from 5*10-11 Torr to 1000 Torr (slightly above atmosphere).
MX7M Kaltkathoden-Aktiv-Vakuum-Messgerät
D-Sub 15, 15 Conductor Cables (Flying Leads)
D-Sub 15, 6 Conductor Cables (Flying Leads)
Wand-Netzteil
Betriebsbereich | 5*10-11 Torr to 1*10-2 Torr |
Anzeige | OLED |
Digitale Kommunikation | RS-485, USB (micro) |
Analoger Ausgang | Konfigurierbar 0 bis 10 V DC |
Programmierbare Sollwerte | 2 |
Sollwert 1 | Offener Kollektor |
Sollwert 2 | Relais |
Versorgungsspannung | 22 V DC bis 26 V DC |
Maximale Leistung | 8 W |
Kalibriermedium | Trockene Luft oder Stickstoff |
Überdruck | 150 PSI |
Auflösung des digitalen Ausgangs | 3 signifikante Ziffern mit Exponent |
Auflösung des Analogausgangs | 16 Bits |
Betriebstemperatur | 0 °C bis 50 °C |
Lagertemperatur | -20 °C bis 60 °C |
Ausheiztemperatur | 250 °C |
Reaktionszeit | ≤50 ms |
Anzeige Lesbarer Abstand | 3 m (10 ft) |
Genauigkeit | |
1*10-9 bis 1*10-3 Torr | ±30% vom Messwert |
Analoger Ausgang | ±10 mV |
Pin | Beschreibung |
1 | Analog Out (Ground) |
2 | RS-485 A (-) |
3 | SP2 NC |
4 | SP2 NO |
5 | SP1 Open Drain |
6 | Do not connect |
7 | Do not connect |
8 | Supply Voltage (+) |
9 | Analog Out (0 to 10) V |
10 | RS-485 B (+) |
11 | SP2 Com |
12 | SP1 Source |
13 | Sensor Voltage Control (Ground) |
14 | Sensor Voltage Control (+) |
15 | Supply Voltage (Ground) |

The MX7M has two set points. Set point 1 is an N-Channel 60 V MOSFET open collector. It has a maximum current rating of 1 A. The datasheet can be found at www.vishay.com/en/product/69958.
Set point 2 is a relay with a maximum switching voltage of 220 V DC (250 V AC) and a maximum switching current of 2 A. The datasheet can be found at www.te.com/catalog/pn/en/1393788-3.
Stainless Steel |
Alumina Ceramic |
Molybdän |
Kovar |
Ag-Cu Braze Alloy |
Copper |
Gehäuse | Aluminium |
Gewicht mit Sensor | 1 kg (2 lbs) |
Gewicht ohne Sensor | 0,3 kg (0.6 lbs) |

Certified to UL 61010-1 |
Certified to CAN/CSA C22.2 No. 61010-1-12 |
CE certified to EN 61010-1, EN 61236-1, EN 55011 |
RoHS compliant |
IP40 |
EAC certified |
ISO 17025 accredited calibration optional |
NIST-traceable calibration optional |
Produkt-Dokumentation
MX7M-Datenblatt |
MX7M Gebrauchsanweisung |
Televac®️ Vacuum Calibration Tolerances |
3D Models (STEP Files)
2-8950-CF40 – MX7M NW40/KF40 Stainless Steel |
Anwendungshinweise
Videos
MX7M Disassembly Video |
Werkzeuge
Televac® Vakuum-Messumformer |
Artikel
Vacuum Measurement Using Modern Cold Cathode Technology |
Brochures
Televac®️ Vacuum Measurement Product Catalog |
MX7M Benefits and Features Brochure |
Download STEP File
Teilenummer | Beschreibung | STEP File |
2-8950-CF40 | MX7M NW40/KF40 Stainless Steel | Download |
MX7M Cold Cathode Active Vacuum
Gauge Quantity Discounts
Menge | Discount |
1 | List |
5 | 2% |
10 | 5% |
15 | 7% |
20 | 10% |
25 | 13% |
30+ | 15% |
D-Sub 15 Cable Quantity Discounts
Menge | Discount |
1 | List |
50 | 5% |
75 | 10% |
100+ | 15% |
