倾斜度测量

The Fredericks Company is an industry leader in electrolytic tilt sensors for an innovative and proven method of measuring anywhere from ±60° down to ±0.5° with high accuracy ranging from ±0.1° (±360 arcseconds) to ±0.0003° (or ±1 arcsecond). Generally, as the range of a tilt sensor decreases, the accuracy increases, which can be seen by looking at our tilt measurement options below. Note that our highest accuracy and glass sensor solutions are typically higher cost, and we’re here to help with a cost-benefit analysis of specific solutions. Our tilt sensors are used in a wide variety of applications ranging from RV leveling and construction vehicle leveling to extremely high accuracy markets like geotechnical and structural health monitoring, and everything in between.

 

In addition to the tilt sensor component for board-level designs, we also offer complete electrolytic tilt sensor circuits, and electrolytic inclinometers that are environmentally sealed and designed for industrial and outdoor use. We have an engineering department with electrical, PCB layout, software/firmware, and mechanical design expertise, so we’ll work with you to build the ideal solution specific to your needs. A complete list of all of our tilt measurement solutions is below.

 

要了解更多关于电解倾斜传感的原理以及如何将倾斜传感器集成到您的应用中,请参阅我们的技术信息页面。

宽范围倾斜传感器

These electrolytic tilt sensors are designed to give wide range measurement up to ±60° with high accuracy from ±0.1° to ±0.05° in one or two axes. They're also the lowest cost sensors we offer.

All electrolytic sensors require an electrolytic tilt sensor circuit (also commonly referred to as signal conditioning or a signal conditioner) to provide a tilt angle output. This can be built into your system or you can purchase a circuit we’ve designed. Our circuits are optimized for the best performance from our sensors.

To learn more about the principles of electrolytic tilt sensors and how to integrate our sensors into your application, see our Technical Information page.

±50° Wide Range Electrolytic Tilt Sensor - Part Number: 0717-4313-99
0717-4313-99
操作范围:±50°
重复性:±0.05°
±60° Wide Range Electrolytic Tilt Sensor - Part Number: 0717-4315-99
0717-4315-99
操作范围:±60°
重复性:±0.05°
±60° Wide Range Electrolytic Tilt Sensor - Part Number: 0717-4318-99
0717-4318-99
操作范围:±60°
重复性:±0.1°
±50° Wide Range Electrolytic Tilt Sensor - Part Number: 0717-4319-99
0717-4319-99
操作范围:±50°
重复性:±0.1°
±40° Wide Range Electrolytic Tilt Sensor - Part Number: 0717-4321-99
0717-4321-99
操作范围:±40°
重复性:±0.1°
±45° Wide Range Electrolytic Tilt Sensor - Part Number: 0717-4322-99
0717-4322-99
操作范围:±45°
重复性:±0.1°
±50° Wide Range Electrolytic Tilt Sensor - Part Number: 0717-4323-99
0717-4323-99
操作范围:±50°
重复性:±0.1°
0717-4326-99 ±30° Dual-Axis Electrolytic Tilt Sensor from The Fredericks Company
0717-4326-99
操作范围:±30°
重复性:±0.1°

中程倾斜传感器

These electrolytic tilt sensors are designed to give mid-range measurement up to ±25° with very high accuracy of at least ±0.005° in one axis. This means you’ll need two sensors to measure in two axes. These sensors are much less expensive than any of our glass solutions, but they're slightly more expensive than our wide-range sensors.

All electrolytic sensors require an electrolytic tilt sensor circuit (commonly referred to as signal conditioning or a signal conditioner) to provide an angle output. This circuit can be built into your system or you can purchase circuitry we’ve designed. Our circuits are optimized for the best performance from our sensors.

To learn more about the principles of electrolytic tilt sensors and how to integrate our sensors into your application, see our Technical Information page.

±25° Mid-Range Electrolytic Tilt Sensor - Part Number: 0703-1602-99
0703-1602-99
操作范围:±25°
重复性:±0.005°
Single-axis mid-range electrolytic tilt sensor from The Fredericks Company
0703-1603-99
操作范围:±25°
重复性:±0.005°

窄范围倾斜传感器

These electrolytic tilt sensors are designed to give narrow range measurement up to ±3° with very high accuracy of at least ±0.001° in one axis. This means that you’ll need two sensors to measure in two axes. These sensors are slightly more expensive than our wide-range sensors, but comparable in cost to our mid-range sensors. They're also much less expensive than any of our glass solutions.

All electrolytic sensors require an electrolytic tilt sensor circuit (commonly referred to as signal conditioning or a signal conditioner) to provide a tilt output. This circuit can be built into your system or you can purchase circuitry we’ve designed. Our circuitry is optimized for the best performance from our sensors.

To learn more about the principles of electrolytic tilt sensors and how to integrate our sensors into your application, see our Technical Information page.

±3° Narrow Range Electrolytic Tilt Sensor - Part Number 0703-0711-99
0703-0711-99
操作范围:±3°
重复性:±0.001°

中档玻璃

这些电解式倾斜传感器提供±10°的中段测量,在一个轴上具有至少±0.0005°的极高精确度。这意味着你需要两个传感器来测量两个轴。这些传感器比我们的任何金属解决方案都要昂贵,因为它们具有更高的精度和玻璃设计。

所有的电解式传感器都需要电解式倾斜传感器电路(通常称为信号调节或信号调节器)来提供角度输出。这个电路可以内置于你的系统中,或者你可以购买我们设计的电路,该电路为我们的传感器的最佳性能而优化。

要了解更多关于电解式倾斜传感器的原理以及如何将倾斜传感器集成到你的应用中,请看我们的技术信息页面。

0719-3705-99
封装0719-3705-99
操作范围:±10°
重复性:±0.0006°。
0737-0101-99
0737-0101-99
操作范围:±10°
重复性:±0.0006°。

窄范围玻璃

These electrolytic tilt sensors are have narrow range measurement from ±3° to ±0.5° with extremely high accuracy of ±0.0008° to ±0.0001° in one axis. This means you’ll need two sensors to measure in two axes. These sensors are more expensive than any of our Fredericks metal solutions because of their higher accuracy and glass design.

All electrolytic sensors require electrolytic tilt sensor circuits (commonly referred to as signal conditioning or signal conditioners) to provide an angle output. This circuit can be built into your system or you can purchase circuitry that we’ve designed that’s optimized for the best performance from our sensors.

To learn more about the principles of electrolytic tilt sensors and how to integrate tilt sensors into your application, see our Technical Information page.

0711-0763-99
0711-0763-99
操作范围:±1°
重复性:±0.0008°。
0711-0768-99
0711-0768-99
操作范围:±3°
重复性:±0.0008°。
±0.5° Narrow Range Glass Electrolytic tilt sensor - Part Number: 0727-1203-99
0737-1203-99
操作范围:±0.5°。
重复性:±0.0003°。
0719-1138-99
封装0719-1138-99
操作范围:±1°
重复性:±0.0008°。
0719-1143-99
封装0719-1143-99
操作范围:±3°
重复性:±0.0008°。
0719-3703-99
封装0719-3703-99
操作范围:±0.5°。
重复性:±0.0003°。

信号调节器 - 电解倾斜传感器电路

Electrolytic tilt sensors require a basic electrolytic tilt sensor circuit to generate a tilt angle output. These are often called signal conditioners, signal conditioning boards, or electronic tilt sensors. In most cases, our sensors can be mounted directly onto the PCB. These electrolytic tilt sensor circuits have many optional outputs including analog 0 to 5 V DC, RS-232/RS-485, PWM, and SPI communications.

Our electronic tilt sensors include convenient mounting holes and connectors allowing you to simply integrate our circuits into your designs. If you’d prefer to integrate our electrolytic tilt sensor circuit into your board-level design, we have an engineering department that can help! We have electrical, PCB layout, software/firmware, and mechanical design expertise, so we’ll work with you to build an electronic tilt sensor specific to your needs.

1-6200-005
接口。介面: SPI
1-6200-006
介面RS-232
1-6200-007
接口。模拟和PWM
1-6200-008
接口。RS-485
Analog/RS-232 Signal Conditioner
1-6200-012
介面。模拟和RS-232

电解倾角计传感器

The electrolytic versions of our analog and digital inclinometer sensors utilize our Fredericks electrolytic tilt sensors and electrolytic tilt sensor circuits are the lowest cost environmentally sealed (up to IP66) inclinometer sensors we offer with a measurement range up to ±60° and repeatability from ±0.1° to ±0.05° in one or two axes. These inclinometer sensors have plastic housings and have a cable with flying leads that can be customized with a connector you specify. Optional outputs for our inclinometer sensors include analog 0 to 5 V DC, RS-232, RS-485, and UART/TTL digital communications.

0729-1751-99
0729-1751-99
操作范围:±60°
接口。介面: SPI
0729-1752-99
0729-1752-99
操作范围:±60°
介面RS-232
0729-1755-99 模拟倾角仪
0729-1753-99
操作范围:±60°
接口。模拟和PWM
0729-1754-99 数字式倾角仪传感器
0729-1754-99
操作范围:±60°
接口。RS-485
0729-1755-99
0729-1755-99
操作范围:±60°
接口。模拟
0729-1759-99
0729-1759-99
操作范围:±60°
介面RS-232
0729-1760-99 RS-485 IP67数字式倾角仪
0729-1760-99
操作范围:±60°
接口。RS-485
0729-1760-04
0729-1760-04
操作范围:±10°
接口。RS-485
±25° Analog/RS-232 Inclinometer - Part Number: 0729-1765-99
0729-1765-99
操作范围:±25°
介面。模拟和RS-232
0729-1767-99
操作范围:±60°
接口。模拟
Dual-axis inclinometer with RS-232 digital communications includes a Molex connector from The Fredericks Company. Part Number: 0729-1768-99
0729-1768-99
操作范围:±60°
介面RS-232
Dual-axis RS-485 digital inclinometer from The Fredericks Company. Part Number: 0729-1769-99
0729-1769-99
操作范围:±60°
接口。RS-485
F203-00A-212-00 - ±3° 模拟和RS-232数字倾角仪
F203-00A-212-00
操作范围:±3°
介面。模拟和RS-232
±25º measurement range inclinometer with UART/TTL digital communications - Part Number: F225-00T-003-01
F225-00T-003-01
操作范围:±25°
接口。UART/TTL

倾斜开关

Our tilt switches (also referred to as a safety switch or tilt switch sensor module) are very similar to our inclinometers, but instead of a continuous output, tilt switches have a discrete on/off output from either a relay or an open collector. The angle where the tilt switch output changes can be set to specific ranges in one or two axes, up to ±45° tilt. These tilt switches come in plastic or metal housings, environmentally sealed up to IP66, with a cable and flying leads that can be customized with almost any connector you specify. The trip angle can be set by us at the factory or set and reset by you in the field.

The nature of the relay and open collector outputs make these units ideal for various tilt switch applications like construction vehicles and agricultural vehicles. More specific tilt switch applications include boom lifts, scissor lifts, and agricultural sprayers.

To learn more about the principles of tilt sensing and how to integrate tilt switch sensor modules into your application, see our Technical Information page.

0729-1736-99 继电器倾斜开关
0729-1736-99
Operating Range: ±1° to ±35°
接口。继电器和RS-232
±1° to ±45° Tilt Switch - Part Number: 0729-1757-99
0729-1757-99
操作范围:±1°至±45°。
接口。Open Collector
0729-1758-99 Open Collector
0729-1758-99
操作范围:±1°至±45°。
接口。Open Collector

传统倾斜产品

0703-0703-99
0703-0703-99
操作范围:±2°
重复性:±0.0014°。
0716-2201-99
0716-2201-99
操作范围:±70°
重复性:±0.003°
0716-5201-99
0716-5201-99
操作范围:±70°
重复性:±0.003°
0716-5201-99
0717-2201-99
操作范围:±70°
重复性:±0.003°
0717-4304-99
0717-4304-99
操作范围:±60°
重复性:±0.1°
0717-5201-99
0717-5201-99
操作范围:±70°
重复性:±0.003°
0728-1025-99
0728-1025-99
操作范围:±85°
重复性:±0.05°
0729-1763-99 继电器倾斜开关
0729-1763-XX
操作范围:±1°至±45°。
接口。继电器和RS-232
0737-0604-99
0737-0604-99
操作范围:±0.5°。
重复性:±0.00014°。
075X-X002-99 MEMS - 弗雷德里克斯
0750-3002-99
操作范围:±30°
接口。RS-485
075X-X002-99 MEMS - 弗雷德里克斯
0750-9002-99
操作范围:±90°
接口。RS-485
075X-X002-99 MEMS - 弗雷德里克斯
0751-3002-99
操作范围:±30°
接口。模拟
075X-X002-99 MEMS - 弗雷德里克斯
0751-9002-99
操作范围:±90°
接口。模拟
0719-3701-99
封装0719-3701-99
操作范围:±0.5°。
重复性:±0.00014°。