Televac® CC-10主动式宽范围真空计

Part Numbers: 2-7980-031, 2-7980-032, 2-7980-052


特点和优点。

  • 非常紧凑的宽范围真空压力表
  • 易于阅读的LED数字真空计显示
  • 卓越的分辨率和重复性的真空计
  • 真空计之间具有卓越的单位对单位性能。
  • ISO 17025 accredited and NIST traceable calibrations optional
  • 优秀的真空计客户支持

Televac® CC-10宽范围有源真空计(也称为模拟真空计)。, 数字真空计或真空压力表)利用两个内部传感器测量从UHV(10-9Torr)到高于大气(103或1000 Torr)的全范围真空。这种真空计有多种功能,包括RS-485通信,两个可编程的设定点,以及一个可选择的模拟真空压力表输出。

明亮的LED数字真空表显示屏使其易于从远处读取。这款宽范围真空压力表的选项可以通过设备前部的四个触摸控制或通过RS-485通信进行设置。这款真空计提供了丰富的配件选择,使用简单,传感器更换方便,是各种真空应用的绝佳选择。

CC-10宽范围主动真空计

产品介绍
价格
校准
数量
NW25/KF25不锈钢
NW25/KF25不锈钢
PN:2-7980-031
$2,130.00

NW40/KF40不锈钢
NW40/KF40不锈钢
PN: 2-7980-032
$2,135.00

CF40/2.75
CF40/2.75" CF-F不锈钢
PN:2-7980-052
$2,150.00

D-Sub 15, 15 Conductor Cable (Flying Leads)

产品介绍
价格
数量
10′ D-Sub 15, 15 Conductor Cable (Flying Leads)
10′ D-Sub 15, 15 Conductor Cable (Flying Leads)
PN: 2-9858-010
$305.00
20′ D-Sub 15, 15 Conductor Cable (Flying Leads)
20′ D-Sub 15, 15 Conductor Cable (Flying Leads)
PN: 2-9858-020
$390.00
35′ D-Sub 15, 15 Conductor Cable (Flying Leads)
35′ D-Sub 15, 15 Conductor Cable (Flying Leads)
PN: 2-9858-035
$625.00
50′ D-Sub 15, 15 Conductor Cable (Flying Leads)
50′ D-Sub 15, 15 Conductor Cable (Flying Leads)
PN: 2-9858-050
$760.00
65′ D-Sub 15, 15 Conductor Cable (Flying Leads)
65′ D-Sub 15, 15 Conductor Cable (Flying Leads)
PN: 2-9858-065
$885.00
100′ D-Sub 15, 15 Conductor Cable (Flying Leads)
100′ D-Sub 15, 15 Conductor Cable (Flying Leads)
PN: 2-9858-100
$1,355.00

墙式电源

产品介绍
价格
数量
100-240 V AC/47-63 Hz, Plug Types A, C, G, I
100-240 V AC/47-63 Hz, Plug Types A, C, G, I
PN: 2-7900-097
$160.00

替换零件

产品介绍
价格
数量
阳极组件
阳极组件
PN: 2-7900-099
$675.00
工作范围 1*10-9托尔至1000托尔。
沟通 RS-485
模拟输出 0 V 至 10 V 线性/对数型
可编程设置点 3个继电器
电源电压 22 V DC 至 26 V DC
最大功率 8 W
校准介质 干燥空气或氮气
过压 150 PSI
数字输出分辨率 2个有指数的重要数字
模拟输出分辨率 16位
操作温度 0℃至50℃
储存温度 -40℃至85℃
烘烤温度 110 °C (electronics removed)
响应时间 ≤500毫秒
Display Readable Display 4米(13英尺)
准确度  
10-9 Torr to 10-1 Torr 十年的±0.2
10-1 Torr to 200 Torr ±15% of reading
200 Torr to 1000 Torr 读数的±5%
模拟输出 ±10 mV
Graph of the analog output behavior for the Televac® CC-10 Wide Range Active Vacuum Gauge.

Legend for the CC-10 Wide Range analog output behavior graph

Pin 说明
1 Analog Out (Ground)
2 RS-485 A (-)
3 SP3 Out
4 SP2 Out
5 SP1 Out
6 Zero adjust input (signal in)
7 EXT Vcc (signal in)
8 Supply Voltage (+)
9 Analog Out (0 to 10) V
10 RS-485 B (+)
11 SP2, SP3 COM
12 SP1 COM
13 HV inhibit signal (signal in)
14 Atm adjust input (signal in)
15 Supply Voltage (-)
Pin diagram of the Televac® CC-10 Wide Range Active Vacuum Gauge.
<STX>0R1<CR> Read units
<STX>0R2<CR> Read SP1L and SP1H
<STX>0R5<CR> Read analog output set parameter
<STX>0W1XXXX<CR> Set pressure unit
<STX>0W2XXXXXXXX<CR> Set SP1L and SP1H
<STX>0C1<CR> Crystal gauge atm adjustment
<STX>0S1<CR> Read pressure data
<STX>0S2<CR> Read error status

Assume address 0

Full list of commands is available in the instruction manual.

The CC-10 has three set points. All three are optically coupled solid state relays that are rated for 0.12 A at 50 V DC. Each set point has hysteresis characteristics and consists of two set values: upper threshold and lower threshold. LEDs on the front panel display the status of each set point. The high and low threshold values of each of the three set points can be set independently.

Glass
Copper
Stainless Steel
Chromium
Solder
Fluorocarbon Elastomer
石英
Enclosure Material Metallized plastic
电气连接 D-Sub 15-pin male
带传感器的重量 698 g (1.54 lbs) (NW25 Flange)
不含传感器的重量 355 g (0.78 lbs)
Dimensional drawing of the Televac® CC-10 Wide Range Active Vacuum Gauge.
CE certified to EN 61010-1, EN 61236-1
RoHS compliant
IP40
ISO 17025 accredited calibration optional
可选择NIST可追溯校准

Download STEP File

部件号 说明 STEP File
2-7980-031 CC-10 NW25/KF25 Stainless Steel Download
2-7980-032 CC-10 NW40/KF40 Stainless Steel Download
2-7980-052 CC-10 CF40/2.75″ CF-F Stainless Steel Download
数量 Discount
1 List
5 2%
10 5%
15 7%
20 10%
25 13%
30+ 15%

D-Sub 15 Cable Quantity Discounts

数量 Discount
1 List
50 5%
75 10%
100+ 15%