1-6200-006 RS-232シグナルコンディショナ-電解傾斜センサ回路

Part Numbers: 1-6200-006, 1-6200-006-MV7

Compatible With: All Fredericks electrolytic tilt sensors


  • 小型電子式チルトセンサー
  • RS-232通信で簡単に統合
  • 取り付け穴とコネクタで簡単に統合
  • 0717 series sensors can be mounted directly on the board
  • 0703 series can be mounted externally and connected with wires

All Fredericks electrolytic tilt sensors require a basic electrolytic tilt sensor circuit to generate a tilt angle output. These are often called signal conditioners, signal conditioning boards, or electronic tilt sensors. The 0717 series dual/two-axis tilt sensors can be mounted directly on these boards for a complete inclinometer solution. Other single/one axis 0703 series and glass tilt sensors must be mounted externally and connected with wires.

This electrolytic tilt sensor circuit has RS-232 communications and mounting holes, making it simple to integrate into your own design. If you’re looking to integrate the electrolytic tilt sensor circuit PCB into your design, The Fredericks Company can help. We offer bills of material, Gerber files, firmware source files, and engineering support. Our team includes electrical/hardware, firmware, and mechanical design engineers ready to assist you. To request information or support, please complete the Technical Support form, including details about your application and specific needs.

RS-232 Signal Conditioning Board
PN: 1-6200-006

RS-232 Signal Conditioning Board with Molex Connector
RS-232 Signal Conditioning Board with Molex Connector
PN: 1-6200-006-MV7

コミュニケーション RS-232
Analog Input Resolution 16 bits (10 bits oversampled)
動作範囲 センサーレンジの0%~100
電源電圧 DC3.3V~DC5V
供給電流 16 mA @ 5 V DC, 11 mA @ 3.3 V DC
動作温度 -40 °C ~ 85 °C
保存温度 -40 °C ~ 125 °C
Sensors Controlled 一、二
測定軸 一、二
温度センサ範囲 -40 °C ~ 125 °C
住宅 なし
Electrical Connections
7 Pin, 2.54 mm (0.1") spacing
Electrical Connections
Molex 0705430006 (7 Pin)
重量 4 g
長さ 32 mm (1.25")
32 mm (1.25")
ホールセンター 27 mm (1.05”)
1-6200-006 Dimensional Drawing
J1 Pin 1 (+5) Supply (+)
J1 Pin 2 (C) Supply (-)
J1 Pin 3 (C) Ground
J1 Pin 4 (OUT) RS-232 transmit (TX)
J1 Pin 5 (IN) RS-232 receive (RX)
J1 Pin 6 (C) Ground
J1 Pin 7 (C) Ground
L1 Dual axis sensor connection
J3 Single Axis sensor x axis connection
J4 Single axis sensor y axis connection

RS-232 Information

Baud Rate 9600
Data Bits 8
Parity なし
Stop Bits 1

RS-232 Commands

‘X’ X axis output (0 to 65535)
‘Y’ Y axis output (0 to 65535)
‘T’ Temperature output (0 to 1023)
‘S’ Output X, Y, temperature at set intervals
‘R’ Stop timed interval output
‘1’ to ‘5’ Delay (in seconds) for set intervals
‘@’ ‘Z’ ‘#’ Set current position as zero
‘&’ ‘C’ ‘*’ Clear saved zero position
RoHS Compliant
数量 価格
1 $69.13
10 $65.30
100 $58.75
500 $47.24
1000+ $41.98