1 Description
This application note shows the MX200 Vacuum Controller analog (0 to 10 V DC) output settings that are equivalent to an MM200 Vacuum Controller.
Back to Table of Contents2 Comparison Chart
Green highlighted values are the default MX200 settings for that vacuum gauge type.
Red highlighted values are the default MM200 settings for that vacuum gauge type.
| Vacuum Gauge | Codice MM200 | Impostazione MX200 | Alto valore | Basso valore |
|---|---|---|---|---|
| 1E | R1EN | Lineare (LIN) | 1,0E+03 Torr | 1,0E+00 Torr |
| R1EL | Non supportato | - | - | |
| 1F | R1EN | Lineare (LIN) | 1,0E+04 Torr | 1,0E+01 Torr |
| R1EL | Non supportato | - | - | |
| 2A | R2AN | Lineare (LIN) | 1,0E+00 Torr | 1,0E-03 Torr |
| R2AL | Logaritmico (LOG) | 1,0E+00 Torr | 1,0E-03 Torr | |
| R2AT | Non supportato | - | - | |
| R2AC | Non supportato | - | - | |
| R2AR | Non supportato | - | - | |
| 4A | R4AN | Lineare per decennio (L-D) | 1,0E+03 Torr | 1,0E-03 Torr |
| R4AU | Lineare (LIN) | 1,0E+00 Torr | 1,0E-03 Torr | |
| R4AT | Non supportato | - | - | |
| R4AL | Logaritmico (LOG) | 1,0E+03 Torr | 1,0E-03 Torr | |
| 5A/5B/5C/5D/5E/5F | R5AN | Lineare (LIN) | Fondo scala | Fondo scala * 0,001 |
| R5AL | Non supportato | - | - | |
| 7B | R7BM | Lineare per decennio (L-D) | 1.0E-03 | 1.0E-07 |
| R7BL | Logaritmico (LOG) | 1.0E-03 | 1.0E-07 | |
| R7BE | Non supportato | - | - | |
| R7BN | Lineare (LIN) | 1.0E-03 | 1.0E-06 | |
| R7BA | Non supportato | - | - | |
| R7BT | Non supportato | - | - | |
| 7E | R7EM | Lineare per decennio 7E (L-D 7E) | 1.0E-02 | 1.0E-08 |
| R7EL | Logaritmico (LOG) | 1.0E-02 | 1.0E-11 | |
| R7Ex | Lineare (LIN) | 1.0E-0x* | 1,0E-(x+3)* | |
| 7F/7FC/7FCS | R7FM | Lineare per decennio (L-D) | 1.0E-02 | 1.0E-11 |
| R7FL | Logaritmico (LOG) | 1.0E-02 | 1.0E-11 | |
| R7Fx | Lineare (LIN) | 1.0E-0x* | 1,0E-(x+3)* |
*Dependent on the value of x; 7E = 2≤x≤5, 7F/7FC/7FCS = 2≤x≤8.
Back to Table of Contents