MX200 Features
- Plage de mesure de la pression maximale de 1*10-11 à 10 000 Torr
- Conception hautement configurable et montable en rack
- RS-232, RS-485, EthernetIP, PROFINET, and USB communications options available
- Up to 10 configurable analog outputs (0 to 10 V DC)
- Up to 8 set point relay outputs
- Affichage OLED à haut contraste avec un angle de vision de 180
- Unités de mesure sélectionnables (Torr, mbar, Pascal)
- Prend en charge les gaz suivants : azote/air, argon, hydrogène, hélium, néon, krypton et dioxyde de carbone.
- ISO 17025 accredited and NIST traceable calibrations available
EthernetIP Features
- 10/100 Mbit, fonctionnement en duplex intégral ou partiel
- Activation ou désactivation du DHCP avec une adresse IP programmable
- LED d'état pour l'état du réseau/module/activité des données portuaires
- Accès web sécurisé pour les données et les paramètres du réseau et de l'unité
PROFINET Features
- 100 Mbit, full duplex port operation
- LED d'état pour l'état du réseau/module/activité des données portuaires
- RJ45 (2) ports for simple integration for new and existing designs
Gamme de fonctionnement | 1*10-11 Torr to 10,000 Torr |
Communications | RS-232/RS-485/USB, EthernetIP/USB, or PROFINET/USB |
Sortie analogique | 0 à 10 V DC (1 par capteur) |
Résolution de la sortie analogique | 16 Bits |
Points de consigne programmables | 4 par module (8 maximum) |
Type de point de consigne | Relais |
Tension d'alimentation | 115/230 V AC (2/1 A), 50-60Hz |
Puissance maximale | 230 W |
Milieu de calibrage | Air sec ou azote |
Température de fonctionnement | 0 °C à 50 °C |
Température de stockage | -20 °C à 70 °C |
Afficher la distance de lecture | 5 m (16 ft) |
Capteurs maximums contrôlés | 10 |
Capteurs maximums affichés | 8 |
Temps de réponse | ≤10 ms |
RS-232 D-Sub 9 Pin | Description |
D-Sub Pin 1 | Sol |
D-Sub Pin 2 | RS-232 TX |
D-Sub Pin 3 | RS-232 RX |
D-Sub Pin 4 | Pas de connexion |
D-Sub Pin 5 | Sol |
D-Sub Pin 6 | Pas de connexion |
D-Sub Pin 7 | Sol |
D-Sub Pin 8 | Pas de connexion |
D-Sub Pin 9 | Sol |
RS-485 3 Pin | Description |
3-Pin Pin 1 | RS-485 B (+) |
3-Pin Pin 2 | RS-485 A (-) |
3-Pin Pine 3 | Sol |
Autres | Description |
USB | USB communications |
Setup lock | Front panel lock switch |
BTLD | Bootload button |

PROFINET/EthernetIP/USB | Description |
P1 | Industrial Ethernet RJ45 port 1 |
P2 | Industrial Ethernet RJ45 port 2 |
NS | Network status LED |
MS | Module status LED |
USB | USB communications |
Setup Lock | Front panel lock switch |
BTLD | Bootload button |

The MX200 has up to eight relay set points. The relays are located on two optional relay modules with four set points each. Individual relay statuses are displayed on the front panel.The heavy-duty relays have an SPDT (1 Form C) contact form and are rated for 24 V DC. They have a maximum currentrating of 8 A at 250 V AC or 5 A at 30 V DC.
Logement | Aluminium |
Connexions électriques | Power cord (IEC 60320 C-13) |
Weight (Base Unit) | 2.2 kg (5 lbs) |
Instrument | Numéro de pièce | Slots Available |
MX200 Base Unit RS-232/RS-485/USB | 2-7900-034 | 6 |
MX200 Base Unit EthernetIP/USB | 2-7900-037 | 5 |
MX200 Base Unit PROFINET/USB | 2-7900-038 | 5 |
Module | Numéro de pièce | Créneau horaire (max) |
Set Point Quad Relay Module | 2-6200-411 | 1 (2) |
1E Module à double membrane piézoélectrique | 2-6200-220 | 1 (5) |
Module à double membrane piézoélectrique 1F | 2-6200-244 | 1 (5) |
2A Module double thermocouple | 2-6200-486 | 1 (5) |
4A Module à double convection | 2-6200-415 | 1 (5) |
7B Module à cathode froide magnétron Penning | 2-6200-227 | 2 (3) |
7EF DI Magnetron Cold Cathode Module | 2-6200-285 | 1 (5) |
Capacitance Diaphragm (24 V DC) Module | 2-6200-451 | 1 (5) |
Capacitance Diaphragm (15 V DC) Module | 2-6200-452 | 1 (5) |
Contrôleur de vide MX200 |
Contrôleur de vide EthernetIP MX200 |
![]() |
![]() |
MX200 PROFINET Vacuum Controller |
|
![]() |
Certifié selon UL 61010-1 |
CE certified to EN61326-1:2006 |
Certifié selon CAN/CSA C22.2 No. 61010-1-12 |
Certifié EAC |
ISO 17025 accredited calibration optional |
NIST traceable calibration optional |
Contrôleur de vide MX200
The Televac® MX200 vacuum controller, also known as a vacuum control unit or vacuum pressure controller, provides reliable and precise vacuum pressure measurements. It connects seamlessly with up to 10 passive Televac® vacuum gauges, including cold cathode, convection, piezo diaphragm, capacitance diaphragm, and thermocouple vacuum gauges. This versatile combination offers an extensive measurement range from 1*10-11 Torr to 10,000 Torr. It is well-suited for a variety of demanding applications across diverse markets, including heat treating, national laboratories, particle accelerators, cryogenics, semiconductor manufacturing, and more!
The MX200 vacuum controller includes individual 0 to 10 V DC analog outputs for each connected vacuum gauge, facilitating straightforward integration into various systems. The MX200 supports multiple gas types such as nitrogen/air, argon, hydrogen, helium, neon, krypton, and carbon dioxide, allowing you to tailor the controller to your specific vacuum application requirements.
Advanced User Interface
The MX200 vacuum controller features a user-friendly interface with six intuitive touch controls and a high-contrast OLED display. This display offers a wide 180° viewing angle and shows the measurements from up to eight connected vacuum gauges. It conveniently displays units of measurement and set point relays and automatically adjusts text size depending on the number of measurements shown, ensuring readability in various operating environments.
Modular and Customizable Design
The MX200 vacuum controller is designed to provide exceptional versatility and customization options. You can connect up to 10 Televac® vacuum gauges tailored specifically for your application. Additionally, the controller can be equipped with up to 8 optional set point relays for precise vacuum process control. To seamlessly integrate into your existing PLC system or PC, we offer multiple communication choices, including RS-232, RS-485, EthernetIP, PROFINET, and USB.
Digital Communication Options
RS-232/RS-485/USB
The standard MX200 vacuum controller includes versatile RS-232, RS-485, and USB digital communication options. These communications simplify the controller’s integration into existing PC or PLC-based systems, making it ideal for a wide range of industrial vacuum applications.
EthernetIP/USB Communication
The MX200 vacuum controller is also available with EthernetIP communication. This option integrates seamlessly into industrial Ethernet environments, allowing for efficient monitoring and control over a network. Ideal for facilities already utilizing EthernetIP protocols, this version maintains all core features, including the intuitive OLED display, analog outputs, and set point relays.
PROFINET/USB Communication
For systems that utilize PROFINET protocols, the MX200 vacuum controller is available with PROFINET digital communications. This version provides easy integration into PROFINET-based industrial automation systems, ensuring reliable and efficient data communication. It retains all standard MX200 features, including the intuitive OLED display, analog outputs, and set point relays.
Complete Vacuum Solutions
Need a passive vacuum gauge to pair with your MX200? Use our product selection guide to find the ideal solution for your application. Ready to configure and purchase your MX200 vacuum controller? Visit our MX200 Online Order Hub and get started!
Documentation sur les produits
Fiche technique du MX200 |
Manuel d'instruction du MX200 |
Tolérances d'étalonnage du vide Televac |
Modèle 3D (fichier STEP)
MX200 Vacuum Controller STEP File |
Notes d'application
Televac® Application Note 3008: MX200 to PC Interfacing and Communications |
Televac® Application Note 3011: MX200 and MM200 Analog Output Comparisons |
Vidéos
MX200 Demonstration Video |
Outils
Centre de commande en ligne MX200 |
Vacuum Leak Rate Converter |
Convertisseur de mesure du vide |
Terminal série Web |
Études de cas
Étude de cas : Argonne National Laboratory |
Articles
Mesure du vide à l'aide de la technologie moderne des cathodes froides |
Brochures
Télécharger le fichier STEP
Numéro de pièce | Description | Fichier STEP |
2-7900-03X | Contrôleur de vide MX200 | Télécharger |