Discontinued: The direct replacement is our Fredericks Tilt Switches.
Part Number: 0729-1763-XX
Caratteristiche e vantaggi:
- ±45° punti di intervento programmabili
- Dual/two-axis measurement tilt switch
- 4 uscite a relè di semplice utilizzo
- Tempo di risposta di ≤100 ms
- Ampio campo di alimentazione di tensione da 6,5 V DC a 40 V DC
- Funziona con le batterie per veicoli da 12 e 24 V CC standard del settore
- Disegno del dispositivo a bassa corrente 30 mA a 12 V DC; basso consumo energetico
- Connettore D-sub a 15 pin (DB15) per una semplice integrazione
- Prestazioni superiori a temperature e ambienti estremi
- Eccellente assistenza clienti
Our tilt switches (also referred to as a safety switch or tilt switch sensor module) are very similar to our inclinometers, but instead of a continuous output, tilt switches have a discrete on/off output from either a relay or an open collector. This tilt switch has 4 relay outputs which can be set to trip at specific angles in two axes, up to ±45° tilt. This tilt switch comes in a plastic housing that is environmentally sealed up to IP66, with a D-sub 15-pin (DB15) connector that can also be customized with almost any connector you specify. The trip angle can be set by us at the factory or set and reset by you in the field via the RS-232 communications.
The nature of the relay outputs makes this unit ideal for various tilt switch applications like construction vehicles and agricultural vehicles. More specific tilt switch applications include boom lifts, scissor lifts, and agricultural sprayers.
Per saperne di più sui principi del rilevamento dell'inclinazione e su come integrare i moduli sensori di inclinazione nella vostra applicazione, consultate la nostra pagina di informazioni tecniche.
Comunicazioni | RS-232 |
Tensione di alimentazione | 6,5 V DC fino a 40 V DC |
Corrente di alimentazione | 30 mA @ 12 V DC |
Campo di funzionamento | ±10º (narrow angle) |
±25º (mid-range) | |
±45º (wide angle) | |
Gamma lineare | ±25º |
Assi di misura | 2 |
Ripetibilità | ±0.005° |
Risoluzione | ≤0.1° (narrow angle) |
≤18 arc seconds (mid-range) | |
≤0.1° (wide angle) | |
Offset Nullo | ≤5° |
Cross-Axis Sensitivity | ≤0,025° per grado |
Long Term Stability/Drift | ≤0.1° |
Offset di temperatura nullo | 0.006° per °C |
Range Offset di temperatura | 0,1% per °C |
Relay Output Ratings | 2A, 220 V DC |
I materiali | Contains magnetic metals |
Temperatura di esercizio | da -40 °C a 70 °C |
Temperatura di stoccaggio | da -40 °C a 70 °C |
Time Constant (63.2% of output) | ≤100 ms |
Alloggiamento | Plastica ABS |
Collegamenti elettrici | Connettore DB15 maschio |
Peso | 82 grams (without potting) |
Lunghezza | 79.76 mm (3.14”) |
Larghezza | 53.34 mm (2.10”) |
Altezza | 27.31 mm (1.08”) |
Centro del foro | 91.22 mm (3.59”) |
Descrizione | Color | Pin Number |
Potenza in ingresso | Red | 8 |
Common | Red | 1 |
Common | Black | 9 |
Common | Black | 15 |
Zero Wire | Orange | 7 |
Relay 1 (IN) | White | 2 |
Relay 1 (COM) | Black | 10 |
Relay 2 (IN) | Green | 3 |
Relay 2 (COM) | Black | 11 |
Relay 3 (IN) | Yellow | 4 |
Relay 3 (COM) | Black | 12 |
Relay 4 (IN) | Blue | 5 |
Relay 4 (COM) | Black | 13 |
Setup via RS-232 Link | ||
RS-232 Input | Black | 14 |
RS-232 Output | Brown | 6 |
RS-232 Settings
Baud Rate | 9600 (default, selectable up to 115200) |
Data Bits | 8 |
Parity | Nessuno |
Stop Bits | 1 |
RS-232 Commands
‘x’ | Output linear X value (0 to 65535) |
‘y’ | Output linear X value (0 to 65535) |
‘c’ | Output X value in degrees |
‘d’ | Output Y value in degrees |
‘e’ | Change and save trip delay |
‘f’ | Change and save return trip delay |
‘h’ | Change and save hysteresis value |
‘g’ | Change and save relay polarity |
‘1’ to ‘4’ | Set the selected axis trip point |
‘n’ | Save current position as zero |
‘+’ | Increase the filter value |
‘-’ | Decrease the filter value |
Conforme alla direttiva RoHS |
CE certified to CFR 47 FCC Part 15 Subpart B, EN 55011:2009/A1:2010, EN 61326-1:2006 |
Descrizione | Numero di parte |
Interruttore a ribalta Custodia in plastica con vaso | 0729-1763-01 |
Interruttore a ribalta Custodia in plastica non potenziata | 0729-1763-03 |
Documentazione del prodotto
0729-1763-XX1 Datasheet |
0729-1763-XX Manuale di istruzioni |
Strumenti
Convertitore di misure angolari |
Video
Che cos'è un sensore di inclinazione elettrolitico? |
Brochures
Catalogo dei prodotti per la misurazione dell'inclinazione |
Aerial Lift Platform Leveling Monitor or Control |
Crane Boom Angle Measurement |
Posizionamento dell'antenna satellitare |
Solar Panel Position and Elevation Control |
Robotic Controls |
Wheel Alignment Systems |