AN 1003 : Configuration du terme Tera pour l'utilisation des produits de basculement TFC

Description

Ce document explique le processus de configuration de Tera Term pour les communications avec les produits TFC tilt à partir d'un PC Windows 7. Le programme de communication série Tera Term doit être installé avant de suivre ces instructions, et un convertisseur série vers USB doit être acheté.

Instructions

1. Branchez le convertisseur série-USB sur votre PC.

2. Ouvrez le menu Démarrer.

3. Ouvrez le Panneau de configuration.

4. Open the Hardware and Sound.

5. Ouvrez le Gestionnaire de périphériques.

6. Développez le menu déroulant Ports (COM & LPT).

7. Déterminez l'affectation du port COM pour votre convertisseur USB vers série, dans cet exemple le convertisseur est affecté à COM3.

8. Ouvrez TeraTerm.Ouvrez le menu Configuration et sélectionnez l'option Port série...

9. Change the Port setting to the COM port for your USB to serial converter, in this example it is COM3.

10. Ensure that the remainder of the settings are the following, then select OK:

  1. Taux de baud : 9600
  2. Données : 8 bits
  3. Parité : aucune
  4. Stop : 1 bit
  5. Contrôle des flux : aucun
  6. Retard de transmission : 0 msec/char, 0 msec/ligne

11. Open the Setup menu and select the Terminal setup… option.

12. Ensure that the settings are the following, then select OK:

  1. Recevoir : CR+LF
  2. Transmettre : CR+LF
  3. Vérification de l'écho local

13. You can now send the desired commands to the unit.